Table of Contents
Advertisement
To enable a completely automated Windows domain logon, you are authenticated
locally and require a previous successful user logon to the target Windows
domain. The first time you attempt a domain logon directly through the Contivity
GINA, without a prior successful Windows domain logon from the local system,
the initial user logon attempt fails.
Note: The client system must have been previously configured to allow
access to the desired Windows domain. This configuration can be set up
by the Windows domain administrator.
You can either execute the current Contivity VPN Client Windows domain logon
or use the Contivity Client GINA by deselecting the "Auto Domain Logon"
option and logging on using an existing local user account. The Windows GINA
screen appears to complete the domain logon.
Enabling and disabling Connect Before Logon
To enable or disable Connect Before Logon, go to the Options menu
and either select or deselect the Connect Before Logon option. The Contivity VPN
Client GINA dialog provides simultaneous Windows NT domain logon when
logging on to the workstation. The Contivity VPN Client must be installed with
the GINA option to be available.
Figure 9 Options menu
Chapter 1 Installing the client 27
Configuring the Contivity VPN Client
(Figure
9)
Advertisement
Table of Contents
