Creating Provision Or Monitor Accounts; Deleting Wlan Management Software User Accounts; Disabling Access Control - Nortel 2350 Reference Manual

Creating Provision or Monitor Accounts

After creating an administrator account, you can create provision or monitor accounts. To create a provision or
monitor account:
1
Select Services > Setup to access the WMS Services Setup page.
2
Click Access Control in the left column to display the Access Control page.
3
Under Add User, type a name for the user.
4
From the Role box, select Provisioning User or Monitoring User.
5
Type the password for the user (1 to 80 alphanumeric characters, with no spaces or tabs). The
password is case-sensitive.
6
Type the administrator password again for verification.
7
Click Save.

Deleting WLAN Management Software User Accounts

To delete a WLAN Management Software user account:
1
Select Services > Setup to access the WMS Services Setup page.
2
Click Access Control in the left column to display the Access Control page.
3
Under Authorized Users, click Delete next to the user you want to delete.

Disabling Access Control

If you have enabled access control for WLAN Management Software, you can disable access control. This
allows all users who have successfully authenticated to the system on which WLAN Management Software is
installed to run WLAN Management Software.
To disable access control:
1
Select Services > Setup to access the WMS Services Setup page.
2
Click Access Control in the left column to display the Access Control page.
3
Under Access Control, click Allow all users.
Nortel WLAN—Management Software 2300 Series Reference Guide
Getting Started 57