Go to
"Specifying the Wireless Technology for a Coverage
Specifying the Wireless Technology for a Coverage Area
(To draw a coverage area, see
area:
1
In the Technology list, select one of the following:
•
802.11a
•
802.11b
•
802.11g
•
802.11a and 802.11b
•
802.11a and 802.11g
Select 802.11a and 802.11b if the area requires 802.11a and 802.11b coverage. Select 802.11a and
802.11g if the area requires 802.11a and 802.11g coverage.
When you specify a coverage area requiring different technologies, WLAN Management Software
creates two areas that completely overlap each other: one area for 802.11a and another for 802.11b/g. An
area requiring 802.11a and 802.11b uses a dual-radio AP model for calculation even if you specify a
single-radio AP.
2
To refine the dimensions of the coverage area, specify the appropriate dimension in the X-Length and
Y-Length boxes.
3
Click Next.
The wizard presents properties and association pages for the technology you chose in
following example shows the wizard for 802.11a and 802.11g technologies.
"Drawing a Coverage Area" (page
Nortel WLAN—Management Software 2300 Series Reference Guide
Planning the Nortel WLAN 2300 System 119
Area".
117).) To specify wireless technology for a coverage
step
1. The