Inverter Parameter Introduction - GE GEP User Manual

System Commissioning

8.2.2 Inverter Parameter Introduction

Parameters
Normal
2022-02-14
09:01:10
VPv1
IPv1
Vac
Iac
Fac
E-Today
E-Total
Serial Number
GEP3.6-1-30
RSSI
Comm Version
Set Safety
Set Date
Set Time
Set Password
W/L Reset
W/L Reload
Description
Home page. Indicates the real-time power of the inverter.
Check the time of the country/region.
Check the DC input voltage of the inverter.
Check the DC input current of the inverter.
Check the voltage of the utility grid.
Check the frequency of the utility grid.
Check the generated power of the system for that day.
Check the total generated power of the system.
Check the serial number of the inverter.
Check the signal strength of the communication module.
Set the safety country/region in compliance with the local grid
standards and application scenario of the inverter.
Set time according to the actual time in the country/region where the
inverter is located.
The password can be changed. Keep the changed password in mind
after changing it. Contact the after-sales service if you forget the
password.
Restore the factory settings of the communication module.
restoring the factory settings,
Set the power factor of the inverter according to the actual situation.
Indicates the PV-PE insulation resistance threshold value. When the
User Manual V1.3-2022-11-18
34