Table of Contents
Advertisement
AF-7
5. Operation
5.1. Managing the Keypad
The drive is configured and its operation monitored via the keypad and display.
NAVIGATE
UP
DOWN
RESET /
STOP
START
5.2. Operating Displays
SToP
H 50.0
5
A 2.3
P 1.50
1500
16
Used to display real-time information, to access and exit
parameter edit mode and to store parameter changes
Used to increase speed in real-time mode or to increase
parameter values in parameter edit mode
Used to decrease speed in real-time mode or to decrease
parameter values in parameter edit mode
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running drive.
When in keypad mode, used to Start a stopped drive or to
reverse the direction of rotation if bi-directional keypad
mode is enabled
5.3. Changing Parameters 5.4. Read Only Parameter
Drive Stopped
SToP
/ Disabled
Drive is
F-01
enabled /
running,
display shows
the output
frequency (Hz)
Press the
F-08
Navigate key
for < 1 second.
The display
will show the
motor current
(Amps)
Press the
10
Navigate key
for < 1 second.
The display
will show the
motor power
(kW)
If F-10 > 0,
F-08
pressing the
Navigate key
for < 1 second
will display the
motor speed
(RPM)
F-08
Access
Press and hold
SToP
the Navigate
key > 2
seconds
Use the up and
F-00
down keys to
select the
required
parameter
Press the
DR-01
Navigate key
for < 1 second
Adjust the
DR-08
value using the
Up and Down
keys
Press for < 1
330
second to
return to the
parameter
menu
Press for > 2
SToP
seconds to
return to the
operating
display
www.geindustrial.com/Drives
5.5. Resetting Parameters
Press and hold
P-def
the Navigate
key > 2
seconds
Use the up and
down keys to
select P-00
Press the
Stop
Navigate key
for < 1 second
Use the up and
down keys to
select the
required Read
Only
parameter
Press the
5.6. Resetting a Fault
Navigate key
O-I
for < 1 second
to display the
value
Press and hold
Stop
the Navigate
key > 2
seconds to
return to the
operating
display
To reset
parameter
values to their
factory default
settings, press
and hold Up,
Down and Stop
buttons for > 2
seconds.
The display will
show "p-def"
Press the Stop
key.
The display will
show "stop"
Press the Stop
key.
The display will
show "stop"
15
Advertisement
Table of Contents
