Inverter Parameter Introduction - GE GEP5.0-3-10 User Manual

08 System Commissioning
Previous page
Short press
Long press for 2s
Set ARC
Pac = xxx W
Short press
Long press for 2s
USB Mode Select
8�2�2 Inverter Parameter Introduction
Parameters
Normal
E-Today
E-Total
Vpv
Ipv
Vac
Iac
Fac
Error History
Model
Ver
Set Language
Set Time
RSSI
W/L Reset
W/L Reload
PF Adjust
Time Interval
Shadow MPPT
Short press
Fault Clear
Short press
Host Mode
Description
Home page. Indicates the real-time power of the inverter. Long press
for 2s to check the current safety code.
Check the generated power of the system for that day.
Check the total generated power of the system.
Check the DC input voltage of the inverter.
Check the DC input current of the inverter.
Check the voltage of the utility grid.
Check the AC output current of the inverter.
Check the frequency of the utility grid.
Check historical error message records of the inverter.
Indicates the specific inverter model. Long press for 2s to set the
safety code. Set the safety country in compliance with the local grid
standards and application scenario of the inverter.
Check the software version.
Set language accordingly. Languages: English, Portuguese, Spanish。
Set time according to the actual time in the country/region where the
inverter is located.
Indicates the received signal strength of the GPRS module and 4G
module.
Power off and restart the WiFi module.
Restore the factory settings of the WiFi module. Reconfigure the WiFi
module network parameters after restoring the factory settings,
Set the power factor of the inverter according to actual situation.
Set Time Interval according to actual needs.
Enable the shadow scan function if the PV panels are shadowed.
User Manual V1.0-2022-05-10
Short press
Short press
Self Check ARC Enable
Device Mode
36
ARC Disable
Set OK
Set Fail
Set OK
Set Fail