To ensure IP65 protection is maintained, please make sure that the inverter is rigorously
packed and its components are sealed properly. GE strongly suggests to install the
inverter at most one day after it has been unpacked. If this is not the case and the
installation takes longer, please re-seal all the unused terminals and ensure that the
inverter and its components are not exposed to water or dust.
The manufacturer provides a standard warranty which comes with the inverter product and
prepaid warranty extension solution for our customer. For further details please visit
www.gesolarinverter.com
03
3 Product Introduction
3.1 Inverter Overview
GEP inverter illustration.
5
6
7
Item
Name
Description
During normal operation, it is in "on" state and it can shut down
DC Switch
1
the inverter after it is disconnected from the grid by the AC breaker.
PV Input Terminal
2
For PV string connection
Wi-Fi /LAN Module (Optional)
3
For Wi-Fi or LAN communication
DRED Function (Optional)
For DRED communication
4
CT and RS485 (Optional)
For CT and RS485 Communication
5
AC Output Terminal
For AC cable connection
6
LCD Display
Inverter operation data overview and parameter configuration.
7
Indicator Lights
8
Display the state of the inverter
Buttons
For configuration and viewing parameters.
9
1. DC Switch
2. PV Input Terminals
3. Wi-Fi /LAN Module (Optional)
4. DRED Function (Optional)
5. CT and RS485 (Optional)
6. AC Output Terminal
7. LCD Display
8. Indicator Lights
8
9. Buttons
9
04