Table of Contents
Advertisement
ABB LGR-ICOS™ GLA232 Series Methane/Ethane Analyzer User Manual
Emergency Shutdown Procedure
If the analyzer requires emergency shutdown:
1. If using the analyzer with MobileGuard™, ensure that no drive is currently active in the
MobileGuard™ software.
2. Flip the power switch on the front panel of the analyzer to OFF. (See Figure 2.)
3. If using the analyzer with MobileGuard™, disconnect both 11.5-15 V DC analyzer power
plugs. (See Figure 4.)
4. Turn off the vehicle.
5. Notify trained service personnel that the analyzer needs repair or servicing.
ABB PROPRIETARY INFORMATION
Figure 3: Rear Panel
Figure 4: One of the 11.5-15 V DC Power Plugs
16
Advertisement
Table of Contents
