Transfer Data Files - ABB GLA232 Series User Manual

ABB LGR-ICOS™ GLA232 Series Methane/Ethane Analyzer User Manual

At the end of each data file are encrypted listings of settings used by the analyzer for
that data file. Settings are typically stored for diagnostic or troubleshooting purposes.

Transfer Data Files

To transfer data files from the analyzer hard drive to a USB storage device:
1. Click the Files button on the User Interface Control Bar (Figure 8) to access the File
Transfer menu (Figure 15).
2. Insert a USB storage device into the USB port on the front panel of the analyzer.
3. Click the Mount USB button (Figure 15).
Figure 15: File Transfer Menu: Local Hard Drive (Left Pane) and USB Flash Drive (Right Pane)
4. Transfer data files from the analyzer hard drive to a USB storage device by dragging and
dropping the files from the hard-drive pane to the USB device pane. Use the left-mouse
button to highlight one or multiple files in the window. The directory windows default to
the local hard drive on the left screen and the USB memory device on the right.
When you have finished transferring files:
1. Click the Unmount USB button.
2. Wait for the Safe to Remove USB Memory Device message before removing the USB
memory device.
3. Click Close to exit the File Transfer menu.
ABB PROPRIETARY INFORMATION 29