ABB GLA232 Series User Manual page 45

ABB LGR-ICOS™ GLA232 Series Methane/Ethane Analyzer User Manual
10. Remove the fuse from the fuse fixture.
11. Insert the new fuse into the fuse fixture.
12. If using the analyzer with MobileGuard™, make the connections to the GPS receiver.
13. Carefully place the top cover on the analyzer and install the screws securing the cover to
the analyzer.
14. If using the analyzer with MobileGuard™, turn on the vehicle.
15. If using the analyzer with MobileGuard™, re-connect both 11.5-15 V DC analyzer power
plugs. (See Figure 4.)
16. Flip the power switch on the front panel of the analyzer to ON (see Figure 2).
To prevent draining the vehicle battery, do not turn on the analyzer before
turning on the vehicle.
IMPORTANT!
ABB PROPRIETARY INFORMATION
Figure 32: Analyzer Fuse Locations
45