ABB GLA232 Series User Manual page 64

Methane/ethane analyzer

Hide thumbs Also See for GLA232 Series:

Table of Contents

ABB LGR-ICOS™ GLA232 Series Methane/Ethane Analyzer User Manual

12. Verify the Ipv4 Address of the Windows device, which should be either 192.168.100.100

or 192.168.100.101. For example, the Windows device IP address is 192.168.100.101.

(Figure 60)

13. Install the VNC software by going to the RealVNC website and downloading the RealVNC

Viewer "EXE" file from http://www.realvnc.com/download/.

Detailed instructions for installing Real VNC Viewer for Windows can be found

online at:

NOTE

http://www.realvnc.com/products/vnc/documentation/5.0/guides/user/Chapter1.html

14. Open the program by clicking the Connect button. (Figure 61)

15. Enter the analyzer's address in the VNC server address field (192.168.100.100 or

192.168.100.101), from Figure 60.

The IP address of the analyzer will be whichever address the Windows device is not.

For example, if the IP address of the Windows device that was displayed in Step 12 is

192.168.100.101, then the IP address of the analyzer will be 192.168.100.100.

Wireless devices can compete for dynamic addresses. If the 192.168.100.100 address

does not connect, use 192.168.100.101.

ABB PROPRIETARY INFORMATION

Figure 61: Real VNC Viewer Installation Screen

Table of Contents