Advertisement
Sensor connection
EN
1
1
Choose SETTINGS > CONNECT to edit connections.
2
Choose SENSORS to pair new sensors or manage paired sensors.
3
Choose „SEARCH NEW" to add new sensors.
4
Make sure that sensors are switched on!
5
Select Sensor with + or - and press START to pair sensor. Repeat, if you want to pair more sensors.
TIP
!
: Some sensors are available in Bluetooth and ANT+ at the same time.
We recommend to choose the ANT+ connection.
2
3
4
5
Advertisement
Need help?
Do you have a question about the R5GPS and is the answer not in the manual?
Questions and answers
Comment connecter le capteur de fréquence cardiaque ? Je l’ai appai
To connect the heart rate sensor to the VDO Cyclecomputing R5GPS:
1. Go to the main menu and select SETTINGS > CONNECT.
2. Select SENSORS to manage or add sensors.
3. Choose SEARCH NEW to find new sensors.
4. Make sure the heart rate sensor is turned on.
5. Select the sensor using “+” or “–”.
6. Press START to connect the sensor.
Tip: The sensor may support both Bluetooth and ANT+. It is recommended to use ANT+ for connection.
This answer is automatically generated