Advertisement
Button functions
EN
1
START/STOP/MENU
– Start training
– Stop training
– Confirm input
– One menu level down
– Switch on the device (press for 3s)
Press and hold the button:
– Open and close menu
2
PLUS
button
– One page forward
– Increase value
Press and hold the button:
– Save and reset training values
3
MINUS
button
– One page backward
– Decrease value
button
3
1
2
Advertisement
Need help?
Do you have a question about the R5GPS and is the answer not in the manual?
Questions and answers
Comment connecter le capteur de fréquence cardiaque ? Je l’ai appai
To connect the heart rate sensor to the VDO Cyclecomputing R5GPS:
1. Go to the main menu and select SETTINGS > CONNECT.
2. Select SENSORS to manage or add sensors.
3. Choose SEARCH NEW to find new sensors.
4. Make sure the heart rate sensor is turned on.
5. Select the sensor using “+” or “–”.
6. Press START to connect the sensor.
Tip: The sensor may support both Bluetooth and ANT+. It is recommended to use ANT+ for connection.
This answer is automatically generated