Table of Contents
Advertisement
iSitePower-M (MAP05A1, MAB05B1)
User Manual
Item
Overload capability
Surge
protecti
on
1. Test conditions: 100% DOD, 0.2C rate charge & discharge at 25°C, at the
beginning of life
A.3 EMC Specifications
Table A-2 EMC specifications
Item
Electromagnetic
interference
(EMI)
Electromagnetic
susceptibility
(EMS)
Issue 02 (2021-12-30)
AC input
PV input
Specifications
Conducted emission
(CE)
Radiated emission
(RE)
Harmonic current
Voltage fluctuation
and flicker
Electrostatic
discharge (ESD)
Electrical fast
transient (EFT)
Radiated
susceptibility (RS)
Copyright © Huawei Digital Power Technologies Co., Ltd.
Specifications
● 102% ≤ Load ≤ 125%: 30s
● 125% < Load ≤ 150%: 10s
● > 150%: short circuit, 0.3s
Differential mode: 3 kA (8/20 μs), common mode:
5 kA (8/20 μs), criterion C
Common mode: 10 kA, 8/20 μs, criterion C
IEC 62920\CISPR11\EN 62040-2
AC port: Class B; DC port: Class B; signal port: Class B;
FE port: Class B
IEC 62920\CISPR11\EN 62040-2
Class B
IEC 61000-3-12
AC power port: The current of each phase is greater
than 16 A.
IEC 61000-3-12
AC power port: Pst ≤ 1.0, P1t ≤ 0.65, dc ≤ 3%, dmax ≤
4%. The time when the value of d(t) exceeds 3% is
less than or equal to 200 ms.
IEC 61000-4-2
Enclosure port: 6 kV (level B) contact discharge, 8 kV
(level B) air discharge
IEC 61000-4-4
AC power port: 2 kV, DC power port: 2 kV, signal port:
1 kV (criterion B)
IEC 61000-4-3
Enclosure port: The test frequency range is 80 MHz to
6 GHz, 80% AM (1 kHz) modulation is used, and the
test level is 10 V/m.
A Technical Specifications
97
Advertisement
Table of Contents
