Table of Contents
Advertisement
iSitePower-M (MAP05A1, MAB05B1)
User Manual
●
●
●
●
●
●
●
●
●
●
●
Handling Battery Leakage
Avoid contact with leaked liquids or gases in case of battery leakage. Electrolyte is
corrosive and can cause irritation and chemical burns. Should you come into direct
contact with the leaked battery electrolyte, do as follows:
Inhalation: Evacuate contaminated areas, get fresh air immediately, and seek
immediate medical attention.
Eye contact: Immediately flush your eyes with water for at least 15 minutes, do
not rub your eyes, and seek medical attention immediately.
Skin contact: Wash the affected areas immediately with soap and water and seek
medical attention immediately.
Intake: Ask for medical help immediately.
Issue 02 (2021-12-30)
Do not place irrelevant objects on the top of the equipment or insert them
into any position of the equipment.
Do not place inflammables around the equipment.
To prevent explosions and body injury, do not place batteries in a fire.
Do not place the battery module in water or other liquids.
Do not short-circuit wiring terminals of batteries. Short circuits can cause a
fire.
Do not short-circuit the AC output port to avoid personal injury and device
damage caused by cable burning.
Batteries may cause electric shocks and high short-circuit currents. When
using the battery, pay attention to the following points:
(a) Remove any metal objects from yourself, such as watches and rings.
(b) Use tools with insulated handles.
(c) Wear rubber gloves and boots.
(d) Do not place tools or metal parts on top of batteries.
(e) Before connecting or disconnecting battery terminals, disconnect the
charging power supply.
(f) Check whether batteries are accidentally grounded. If it is accidentally
grounded, remove the power supply from the ground. Touching any part of a
grounded battery can cause an electric shock. If these grounding points are
removed during installation and maintenance, the possibility of electric shocks
can be reduced.
Do not use water to clean electrical components inside or outside of a
cabinet.
Do not stand on, lean on, or sit on the top of the equipment.
Do not damage the modules of the equipment.
If a battery module is dropped or violently impacted during installation,
dispose of the battery module. Safety risks such as cell leakage and electric
shock may occur if a damaged battery module is used.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Safety Precautions
5
Advertisement
Table of Contents
