Related Manuals for Wampat W22F5121W
Summary of Contents for Wampat W22F5121W
- Page 1 Assembly Instructions W22F5121W Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 x 40 x 46 x 24 x 42 x 12 Cam bolt Cam lock Screw Wooden dowel Screw Screw Ø6x35mm Ø4x30mm Ø5x45mm Ø3.5x12mm x 16 x 10 x 14 Bolt Screw Plastic wedge Screw Handle Magnetic plate Ø4x16mm Ø4x12mm Ø3x14mm x 16 x 14 Shelf support pin...
- Page 5 · Attach part(24) to panels(23) with parts(25). · Gently screw cam bolts(A) into panel(3). ３...
- Page 6 L1 > L2 · Attach panel(3) to panels(23) with bolts(M) and parts(Q) correctly. · Insert dowels(D) into panel(3). · Attach panel(7) to panel(3) with screws(C) correctly.
- Page 7 · Separate the sliders bracket(V-2) from the sliders arm(V-1) as per diagram. · Attach slider arm(V-1) to panel(7) with screws(F) correctly.
- Page 8 · Gently screw cam bolts(A) into panel(14). · Insert dowels(D) into panel(3). · Attach panel(14) to panel(3) correctly. · Insert and secure cam locks(B) to panel(3) to lock it.
- Page 9 180° · Attach slider arm(V-1) to panel(5) with screws(F) correctly. · Turn over panel(5) 180 °, then attach another slider arm(V-1) to it with screws(F) correctly.
- Page 10 · Gently screw cam bolts(A) into panels(6,9). · Attach parts(N,O) to panel(6) with screws(K).
- Page 11 · Insert dowels(D) into panel(5). · Attach panel(5) to panel(6) with screws(E) correctly. · Insert dowels(D) into panel(9). · Attach panel(9) to panel(6)correctly. · Insert and secure cam locks(B) to panel(9) to lock it.
- Page 12 Finished edge · Insert dowels(D) into panel(10). · Attach panel(10) to panel(9) correctly. · Insert and secure cam locks(B) to panel(10) to lock it.
- Page 13 · Insert dowels(D) into panels(6,10). · Attach panel(3) to panels(6,10). · Insert and secure cam locks(B) to panels(6,10) to lock it.
- Page 14 Finished edge · Gently screw cam bolts(A) into panels(19,20). · Attach panel(22) to panel(19) correctly, then insert and secure cam locks(B) to panel(22) to lock it. · Attach parts(21) to panel(19), attach panel(20) to panel(22) and parts(21). · Insert and secure cam locks(B) to panel(22) to lock it.
- Page 15 · Gently screw cam bolts(A) into panels(2,13).
- Page 16 L1 > L2 · Attach panel(2) to panels(19,20) with bolts(M) and parts(Q) correctly. · Insert dowels(D) into panel(2). · Attach panel(7) to panel(2) with screws(C) correctly.
- Page 17 · Attach slider arm(V-1) to panel(7) with screws(F) correctly. · Insert dowels(D) into panel(2). · Attach panel(13) to panel(2) correctly. · Insert and secure cam locks(B) to panel(2) to lock it.
- Page 18 · Insert dowel(D) into panel(12), attach panel(12) to panel(3) correctly. · Insert and secure cam lock(B) to panel(12) to lock it. · Insert dowels(D) into panels(6,12). · Attach panel(2) to panels(6,12). · Insert and secure cam locks(B) to panels(6,12) to lock it.
- Page 19 x 10 · Insert dowels(D) into panels(2,3,9,12,13,14). · Attach panel(11) to panel(12) with screws(E). · Attach panel(11) to panels(2,3,9) with bolts(M) and parts(Q) correctly.
- Page 20 x 16 · Attach parts(Y,Z) to panel(11) with screws(H).
- Page 21 · Insert parts(Q) into panels(17,18), then insert and screw cam bolts(P) correctly. · Insert dowels(D) into panel(12). · Attach panels(17,18) to panel(12). · Insert and secure cam locks(B) to panel(12) to lock it.
- Page 22 ·Carefully slide panels(26) into place along the back of the assembly.
- Page 23 · Gently screw cam bolts(A) into panel(1). · Attach parts(4) to panel(1) with bolts(T).
- Page 24 x 10 · Insert dowels(D) into panels(2,3,5,13,14,17,18). · Attach panel(1) to panels(2,3,5,13,14,17,18). · Insert and secure cam locks(B) to panels(2,3,5,17,18) to lock it.
- Page 25 Finished edge · Insert the shelf supports(R) at the desired level and place the adjustable shelf(8) onto the shelf supports.
- Page 26 x 21 · Attach parts(I) to panels(15,16) with screws(W). · Attach parts(X) to panels(15,16) with screws(W). · Attach handles(L) to panels(15,16) with bolts(G).
- Page 27 x 12 · Attach panels(15,16) to panels(9,13,14) with screws(W).
- Page 28 x 10 x 10 · Secure parts(J) with screws(K) as per diagram.
- Page 29 · Attach slider bracket(V-2) to panels(28,29) x 12 with screws(F) correctly. · Gently screw cam bolts(A) into panels(31). · Attach handles(S) to panels(31) with bolts(G).
- Page 30 · Attach panels(28,29) to panels(27) with screws(C). · Carefully insert panels(30) into the slot of panels(27,28,29). · Attach panels(31) to panels(28,29). · Insert and secure cam locks(B) to panels(28,29) to lock it.
-
Page 31: Final Assembly
Slider arm Slider bracket Note : If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm then re-assembled the drawer until they were going in smoothly well. ·...