Page 1
Assembly Instructions W11F4123W W11F4124C Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
Page 10
· Attach panel (7) to panels (10,11) with screws (M) correctly.
Page 11
· Attach panel (9) to panels (10,11) correctly. · Insert and secure cam lock (D) to panel (9) to lock it.
Page 12
x 10 · Attach panel (2) to panels (3,4,6,9) with screws (M) correctly.
Page 13
· Attach legs (8,15) to panel (2). · Stick parts (N) on the bottom of the legs (8).
Page 14
Carefully slide panel (5) into place along the back of the assembly.
Page 15
· Screw cam bolts (E) into panels (1,13,14). · Insert dowels (B) into panels (12,13,14).
Page 16
· Attach panels (13,14) to panel (12) correctly. · Insert and secure cam lock (D) to panel (12) to lock it.
Page 17
· Attach panels (12,13,14) to panel (1) with screws (M) correctly.
Page 18
· Attach panel (1) to panels (3,4,7). · Insert and secure cam lock (D) to panels (3,4,7) to lock it.
Page 19
· Secure parts (O) to panels (1,3,4) with screws (P).
Page 20
· Attach panels (19,20) to panels (18) with screws (L) correctly. · Carefully slide panels (21) into place along the bottom of the assembly.
Page 21
· Screw cam bolts (G) into panels (16,17).
Page 22
· Attach Handle (H) to panels (16,17) with bolts (I). · Attach panels (16,17) to panels (19,20). · Insert and secure cam locks (F) to panels (19,20) to lock it.
Page 23
x 16 x 16 · Screw cam bolts (G) into panels (22,23). · Insert dowels (C) into panels (24,25).
Page 24
x 16 · Attach panels (24,25) to panels (26) with screws (L) correctly. · Carefully slide panels (27) into place along the bottom of the assembly.
Page 25
· Attach Handle (J) to panels (22,23) with bolts (K). · Attach panels (22,23) to panels (24,25). x 16 · Insert and secure cam locks (F) to panels (24,25) to lock it.
Page 26
Slider arm Slider bracket Slider bracket · Assembled the drawers as per diagram Note : If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm. Loosen the screws on slider brackets, You can adjust up or down by a few mm.
Page 27
WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.