Related Manuals for Wampat W01L3183N
Summary of Contents for Wampat W01L3183N
- Page 1 Assembly Instructions W01L3183N Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 Screw Cam bolt Cam lock Wooden dowel Plastic wedge x 28 x 28 x 28 Screw Magnetic plate Magnetic touch door pivot Screw Sticker Adjustable foot Screw Wooden dowel x 12 x 10 Screw Air spring Screw L-iron Anchor x 20 Tools Required lamp belt (Not included)
- Page 5 x 16 · Screw parts (A) into panels (4,5,6,7). ３...
- Page 6 L1>L2 L1>L2 · Insert dowels (C) into panels (8,9). · Attach panels (4,5) to panel (8) correctly. · Attach panels (6,7) to panel (9) correctly. · Insert and secure cam locks (B) to panels (8,9) to lock it.
- Page 7 · Before installing, split Q1,Q2,Q3,Q4 as shown in the figure x 12 · Attach parts (Q4) to panels (8,9,12) with screws (P) correctly.
- Page 8 Step 1 Step 2 Step 3 Final Assembly Please note the installation direction of (F1), do not install it in reverse. · Screw parts (A) into panel (2). · Screw parts (F1) into panel (2) with screws (G) , then cover (F1) with (F2).
- Page 9 · Insert dowels (O) into panels (10). · then attach panels (10) to panel (2) with screws (N).
- Page 10 · Attach panels (11,12) to panel (2), · Insert and secure cam locks (B) to panels (11,12) to lock it.
- Page 11 · screws parts (M) into panels (14). · Insert dowels (C) into panels (14). · then attach panels (14) to panel (3) with screws (N).
- Page 12 · Insert dowels (C) into panels (11,12). · then attach panel (3) to panel (11,12) with screws (N).
- Page 13 · Insert dowels (C) into panels (2,3). · Attach panels (6,7,9) to panels (2,3), · Insert and secure cam locks (B) to panels (2,3) to lock it.
- Page 14 · Carefully slide panel (13) into place along the back of the assembly.
- Page 15 · Flip 180°.
- Page 16 · Insert dowels (C) into panels (2,3). · Attach panels (4,5,8) to panels (2,3). · Insert and secure cam locks (B) to panels (2,3) to lock it. · Stick the skid pad ( I ) on the bottom of the parts (4,5,6,7).
-
Page 17: Front Edge
BACK EDGE FRONT EDGE · Screw parts (A) into panel (1). · Screw parts (R) into panel (1) with screws (P). - Page 18 FRONT EDGE BACK EDGE · Insert dowels (C) into panels (10). · Attach panel (1) to panels (4,5,6,7,10), · Insert and secure cam locks (B) to panels (4,5,6,7,10) to lock it.
- Page 19 · Secure parts (D) with screws (E) as per diagram.
- Page 20 · Secure parts (J) into panels (15,16) with screws (L). · Insert parts (H) into panels (15,16). · Secure parts (Q2) into panels (15,16) with screws (P) correctly.
- Page 21 Step 1 Step 2 . Insert panels (15,16) into panels (11,12) and (7) correctly. · Press parts (H) and move panels (15,16) into panels (5) and (11,12). · Release the hand pressing parts (H) , move panels (15,16) to make parts (H) aligned with the holes on panels (5) and (11,12). Please be careful when installing to avoid part (H) scratching the paint surface.
- Page 22 · Screw parts (Q1) to parts (Q4). · Attach parts (Q1) to parts (Q2) with parts (Q3).
- Page 23 Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
- Page 24 · Stick stickers (K) on cam locks (B). x 12 Please clean the surface before installation. Step 1: Keep the switch in the "off" Step 2: Plug USB cable into your TV Step 3: Tear tape behind the light strip and stick anywhere you want Note: 1.
-
Page 25: Final Assembly
Tip1: If you find that the door does not connect smoothly, you can adjust parts (F) to achieve a perfect connection. Final Assembly Tip2: The door has cushioning function so when you feel it opens too slowly or there is a pause, you can gently press the door to open it easily.