Related Manuals for Wampat W04L3181N
Summary of Contents for Wampat W04L3181N
- Page 1 Assembly Instructions W04L3181N Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 Screw Screw Cam bolt Cam lock Wooden dowel Ø4x35mm Ø5x40mm x 28 x 36 x 28 Screw Anchor Allen key Screw Door shaft Ø3.5x10mm Screw Screw Magnetic touch Ø3x14mm Ø4x12mm Adjustable foot x 30 Screw Ø4x40mm L-iron Plastic wedge Sticker Air spring Screw Tools Required...
- Page 5 x 16 · Screw parts (A) into panels (2,3,4,5). ３...
- Page 6 L1>L2 L1>L2 · Insert dowels (C) into panels (6,7). · Attach panels (4,5) to panel ( 7) correctly. · Attach panels (2,3) to panel (6) correctly. · Insert and secure cam locks (B) to panels (6,7) to lock it.
- Page 7 Step 1 Step 2 Step 3 Final Assembly Please note the installation direction of (O1) , do not install it in reverse. · Attach parts (O) to panels ( 3,6,5,7 ) with screws (I ) correctly.
- Page 8 · Before installing, split Q1,Q2,Q3,Q4 as shown in the figure · Attach parts (Q4) to panels (6,7) with screws (L) correctly.
- Page 9 · Insert dowels (C) into panels (15). · Then attach panels (15) to panel (14) with screws (E).
- Page 10 · Screw parts (A) into panels (8,9).
- Page 11 · Insert dowels (C) into panels (12 ). · Attach panels (12 ) to panels (8,9) correctly . · Insert and secure cam locks (B) to panels (12) to lock it.
- Page 12 · Insert dowels (C) into panels (8,9). · Attach panels (10) to panels (8,9) correctly.
- Page 13 · Insert dowels ( C) into panels (8,9). · then attach panel (14) to panel ( 8,9 ) with screws (E).
- Page 14 · Carefully slide panels (13) into place along the back of the assembly. · Attach parts (18) to panel (14) with screws (F).
- Page 15 · Insert dowels (C) into panels (12,14). · Attach panels (2,3,4,5,6,7) to panels (12,14). · Insert and secure cam locks (B) to panels (12,14) to lock it.
- Page 16 · Screw parts (M ) into panels (15). · Stick the skid pad ( N ) on the bottom of the parts (2,3,4,5).
-
Page 17: Front Edge
BACK EDGE FRONT EDGE · Screw parts (A) into panel (1). · Screw parts (R) into panel (1) with screws (L). - Page 18 · Insert dowels (C) into panels (8,9,10). · Attach panel (1) to panels (2,3,4,5,8,9). · Insert and secure cam locks (B) to panels (2,3,4,5,8,9) to lock it. · Attach panels (10) to panel (1) with screws (T).
- Page 19 Install one door shaft of the downward swing door first, and then install the other when assembling the door components · Secure parts (W) into panels (16,17) with screws (V). · Secure parts (H) into panels (16,17) with screws (L). ·...
- Page 20 · Insert parts (H) into the corresponding holes of parts (8,9) · Insert part (16, 17) into the corresponding holes of part(5, 3). · Secure parts (H) into panels (16,17) with screws (L).
- Page 21 · Screw parts (Q1) to parts (Q4). · Attach parts (Q1) to parts (Q2) with parts (Q3).
- Page 22 · Unscrew the 3 screws which already in the back bottom of the fireplace. · Fix the L-shaped iron part to the bottom of fireplace using the screws .
- Page 23 · Insert fireplace from back of the tv stand then fix L-shaped iron part to panel(14 ).
- Page 24 · Screw parts (U) into panel (11) using screws (L). · Attach parts (11) to panels (8,9) using screws (L).
- Page 25 · Secure parts (P) with screws (K) as per diagram.
- Page 26 Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
- Page 27 · Stick stickers (S) on cam locks (B). Please clean the surface before installation. Step 1: Keep the switch in the "off" Step 2: Plug USB cable into your TV Step 3: Tear tape behind the light strip and stick anywhere you want Note: 1.
-
Page 28: Final Assembly
Tip1: If you find that the door does not connect smoothly, you can adjust parts(O) to achieve a perfect connection. Tip2: The door has cushioning function so when you feel it opens too slowly or there is a pause, you can gently press the door to open it easily. Final Assembly...