Advertisement
Quick Links
Advertisement
Related Manuals for Wampat W01E3157R
Summary of Contents for Wampat W01E3157R
- Page 1 Assembly Instructions W01E3157R W01E3158W...
- Page 4 Shelf support pin Cam bolt Handle with bolt Wooden dowel Cam lock x 26 x 29 x 42 Plastic wedge Screw PVC nail with pin Screw with screw x 24 x 10 Cam lock Screw Wrench Wrench x 48 x 16 Drawer slider Handle with screws Tools Required...
- Page 5 x 20 · Screw cam bolts (A) into panels (1,2,9). ３...
- Page 6 x 22 · Screw cam bolts (A) into panels (3,4,5,6,17).
- Page 7 Step 1 Step 2 Slider arm Slider bracket · Separate the slide bracket from the slide arm as per diagram.
- Page 8 OPEN Mounting holes x 24 · Attach Slider arms to panels (3,4,5,6) with screws (O) correctly.
- Page 9 · Screw parts (H) to panel (13) using parts (K,L) .
- Page 10 · Insert dowels (C) into panels (12). · Attach panels (12) to panels (3,4,5,6). · Insert and secure cam locks (B) to panels (12) to lock it.
- Page 11 · Insert dowels (C) into part (13). · Attach part (13) to parts (3,4). · Insert and secure cam locks (B) to part (13) to lock it.
- Page 12 · Insert dowels (C) into panels (3,4,5,6). · Attach panel (2) to panels (3,4,5,6) with screws (E).
- Page 13 · Insert dowels (C) into panels (7,8). · Attach panel (9) to panels (7,8). · Insert and secure cam locks (B) to panels (7,8) to lock it.
- Page 14 · Insert dowels (C) into panels (2). · Attach panels (7,8,9) to part (2). · Insert and secure cam locks (B) to panels (7,8,9) to lock it. · Knock pins (G) into panels (7,8,9).
- Page 15 · Carefully slide part (15,16) into place along the back of the assembly.
- Page 16 x 10 · Insert dowels (C) into panels (3,4,5,6,13). · Attach panel (1) to panels (3,4,5,6,13). · Insert and secure cam locks (B) to panels (3,4,5,6,13) to lock it.
- Page 17 x 10 · Secure parts (F1) with screws (F2) as per diagram.
- Page 18 x 16 · Attach panels (18,19) to panel (20) with screws (I). · Carefully slide panel (21) into place along the bottom of the assembly.
- Page 19 The slot is on the lower side. · Attach parts (P1) to panels (17) with screws (P2).
- Page 20 x 16 · Attach part (17) to panels (18,19). · Insert and secure cam locks (N) to panels (18,19) to lock it.
- Page 21 x 24 · Attach slider brackets to panels (18,19) with screws (O) correctly.
- Page 22 Slider arm Slider bracket Slider bracket · Assembled the drawers as per diagram Note : If the drawer does not go in smoothly. Press or lift the plastic release lever. Pull out the slider bracket from the slider arm. Loosen the screws (O) on slider brackets, You can adjust up or down by a few mm.
- Page 23 · Attach panel (11) to panels (5,6) using parts (D). 7 2 1...
- Page 24 · Attach part (M) to panel (10) correctly. · Attach part (E2) to panel (10) with bolts (E1) correctly. 7 2 2...
- Page 25 · Attach parts (Q) to panel (10) with screws (J) correctly,but don't fix the screws tight. 7 2 3...
- Page 26 · Installing the door (10) in position,adjust door height and leveling, then fix screws tight and slide door (10) into designated area. 7 2 4...
- Page 27 Wall · To prevent TV cabinet from toppling,install the parts (S). 7 2 5...