Initializing Scsi Subsystem; Scanning For Scsi Devices; Initializing Scsi Devices; Bad Scsi Bus Mode Non-Lvd Device Found - HP StorageWorks MSA500 G2 User Manual

92 HP StorageWorks MSA500 G2 Storage System User Guide
Action: Remove the failed controller.

20 Initializing SCSI Subsystem

Type: Informational
Description: The SCSI subsystem is being initialized as part of the power up
sequence.
Action: None

21 Scanning for SCSI Devices

Type: Informational
Description: The controller is scanning for hard drives.
Action: None

22 Initializing SCSI Devices

Type: Informational
Description: The controller is initializing the hard drives.
Action: None

24 Bad SCSI Bus Mode Non-LVD Device Found

Type: Error
Description: The MSA500 G2 storage system does not support SCSI SE
devices; it only supports SCSI LVD devices.
Action:
1. Power down the storage system (on page 28).