Keysight Technologies X Series Custom Installation Notes page 33

Figure 31 Insert ODI Cable
6. Referring to Figure
AUX IF OUT ports and secure them with the original lock washers and nuts (1). Torque them to
10 in-lbs.
Figure 32 Rear Panel Cables Installation - Configuration A
7. Insert the BNC cable through the rear panel EXT REF IN port and secure with the lock washer
and nut (2). Torque to 21 in-lbs.
Installation Note N9042-90011
32, insert the two SMA cables through the rear panel TRIGGER 3 IN and
Option ST1 and ST2 – IQ Streaming
33