Keysight Technologies X Series Custom Installation Notes page 29

Reinstall Chassis Rear Brace – Without Option R40
1. Referring to Figure
through the round hole provided in the rear brace.
Figure 28 Reinstall Chassis Rear Brace - Without Option R40
2. Secure the chassis rear brace to the instrument with the four M3.0 panhead screws (2) and the
two new M3.0 flathead screws (3). Torque all screws to 9 in-lbs.
3. Secure the ODI cables to the chassis rear brace using the two cable clamps and two new M3.0
panhead screws (4) provided in this kit, as seen in
Installation Note N9042-90011
28, reinstall the chassis rear brace (1), carefully routing the ODI cables
Option ST1 and ST2 – IQ Streaming
Figure 28. Torque the screws to 9 in-lbs.
29