Keysight Technologies X Series Custom Installation Notes page 11

Top Brace Removal
1. Referring to Figure
attaching the top brace (3) to the instrument and set it aside. The fourteen flathead screws
can be discarded, and they will be replaced with new ones.
Figure 3 Remove Top Brace
Blank Plate Removal
1. Referring to Figure
(2) securing it and discard the plate.
Installation Note N9042-90011
3, remove the fourteen flathead screws (1) and three panhead screw (2)
4, if the instrument has a blank plate (1), remove the two panhead screws
Option ST1 and ST2 – IQ Streaming
11