SINGULARITY COMPUTERS SPECTRE INTEGRA-M Assembly Manual page 5

High End Components
•
Spectre Integra-M/MA fits ATX motherboards and has 7 expansion slots. It is designed to fit
the largest high-end GPUs. It can fit the largest PSUs up to 220mm. For the water-cooling
system it can fit 2x 360mm radiators 45mm thick with a single set of fans and the D5 pump.
The PowerBoard can handle the most high-end PSUs and components.
Radiator Adjustment
•
The radiator mounting panels have a large range of adjustment to help with port alignment to
the distribution plate.
Storage
•
Spectre Integra-M/MA has 7x 2.5" Drive positions. Two are on the top of the PSU shroud, four
inside of the PSU shroud and there is one integrated on the PowerBoard. The two on top of the
PSU shroud cannot be used with vertically mounted GPUs.
Design & Engineering
We have been building high end water-cooled systems for over 15 years. Our approach to product
development begins with a need for our own builds and so the origin is always function. From
there we start to build ideas around this function and the aesthetics and everything else follows.
The original ideas for our products came from years of building highly customized, high end
water-cooled systems and trying to reduce the exceptionally long build times and complexity.
Our approach to development is hands on, we are using and testing our own products every day.
Manufacturing & Quality
Almost all components of Spectre Integra-MA are CNC machined from a solid block of material
with extreme precision. Everything is carefully assembled by hand and tested. Our approach and
philosophy are that there is no hidden or back side, everything is on display and so the design is
a celebration of the raw materials and the manufacturing processes with everything on display.
Revision 1.1
Spectre Integra-M/MA Assembly Manual
Page | 4