Table of Contents
Advertisement
Spectre Integra-M/MA Assembly Manual
Step 4: Install Feet and Top Supports.
Install the Feet, for each one using a M4 x 16mm fastener with an M4 Spring Washer on the middle
hole and 2x M4 x 10mm fasteners with M4 Spring Washers on the outer holes. It is best do this
with the distribution plate laying flat and on the edge of a table so that you can easily access the
Feet.
Install the Top Supports, for each one using 2x M4 x 20mm Fasteners per support. It is best to do
this with the case standing upright on the Fee.
Revision 1.1
Page | 12
Advertisement
Table of Contents
Need help?
Do you have a question about the SPECTRE INTEGRA-M and is the answer not in the manual?
Questions and answers