Goodwe ET Series User Manual page 27

User Manual V1.1-2022-12-20 05 Installation
ALT: 4000m
IP66
0%~95%RH
Mounting Support Requirements
• The mounting support shall be nonflammable and fireproof.
• Install the equipment on a surface that is solid enough to bear the inverter weight.
• Do not install the product on the support with poor sound insulation to avoid the noise
bothering people nearby.
Installation Angle Requirements
• Install the inverter vertically or at a maximum back tilt of 15 degrees.
• Do not install the inverter upside down, forward tilt, back forward tilt, or horizontally.
23