Table of Contents
Advertisement
4.
Check old and new kernel versions, and then press the Enter key.
Software upgrade starts.
Tip
When software upgrade starts, "In progress ■" appears and "■" blinks. Blinking "■" stops during upgrade in some
cases, but upgrade is going normally.
When the upgrade has been completed, the display disappears and the system restarts.
5.
Select [Monitor Upgrade] from the [System Configuration] menu.
The [Monitor Upgrade] window opens.
6.
Check whether the version of the upgraded item has been updated.
Procedure for upgrading the kernel of the controller
1.
Select [Controller Upgrade] from the [Controller] menu.
2.
Type the set 4-digit password.
For setting a password, refer to the instruction manual of the monitor.
The [Controller Upgrade] window opens.
3.
Select [Kernel Upgrade].
About 10 seconds later, a message to check old and new kernel versions and the upgrade execution status appears.
Example of display
Controller kernel will be upgraded and monitor will restart.
Are you sure ?
4.
Check old and new software versions, and then press the Enter key.
Software upgrade starts.
When the upgrade has been completed, the system restarts.
5.
Close the [Controller Upgrade] menu.
6.
Select [Controller Upgrade] again and check whether the version of the upgraded item has been updated.
5-1-4.
Procedure for Upgrading the FPGA of the Unit
1.
Select [Monitor Upgrade] from the [System Configuration] menu.
2.
Type the set 4-digit password.
For setting a password, refer to the instruction manual of the monitor.
The [Monitor Upgrade] window opens.
3.
Select [FPGA Upgrade].
About 10 seconds later, a message to check old and new FPGA versions and the upgrade execution status appears.
Example of display
Monitor FPGA will be upgraded and monitor will restart.
Are you sure ?
4.
Check old and new software versions, and then press the Enter key.
Software upgrade starts.
Tip
When software upgrade starts, "In progress ■" appears and "■" blinks. Blinking "■" stops during upgrade in some
cases, but upgrade is going normally.
When the upgrade has been completed, the display disappears and the system restarts.
5.
Select [Monitor Upgrade] from the [System Configuration] menu.
The [Monitor Upgrade] window opens.
6.
Check whether the version of the upgraded item has been updated.
BVM-E171
5-3
Advertisement
Table of Contents
