Display assembly
Removing the Display assembly
1. Follow the procedure in
2. Remove the:
a.
Batteries
b.
Bottom chassis cover
c.
PCIe heatsink assembly
d.
Docking port assembly
e.
WLAN card
f.
WWAN card
g.
GPS module
h.
Heatsink assembly
i.
Hinge covers
3. Remove the two 'M2*3' screws [1] on the EDP bracket, and turn it up side down [2].
4. Pull and disconnect the EDP cable from the system board [3] and unroute the antennae cables [4].
5. Open the LCD lid.
100
Removing and installing components
Before working inside your
computer.