Advertisement
Quick Links
Black Pneumatic Wall Mounted Keyboard Tray
Instruction Manual
SKU: MOUNT-KB35A
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-kb35a
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo MOUNT-KB35A
Summary of Contents for Vivo MOUNT-KB35A
- Page 1 Black Pneumatic Wall Mounted Keyboard Tray Instruction Manual SKU: MOUNT-KB35A Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-kb35a GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 OPTION A: Wood Stud Installation Place Wall Plate (A) against the wall and mark drilling locations with a pencil. Use of a stud finder and Level (T-D) is highly recommended. Drill 1.2” (30mm) deep holes using a .12” (3mm) bit, then attach Wall Plate (A) to wall using M6x50mm Screws (M-A) and a Phillips screwdriver. - Page 4 STEP 2 Slide Arm Extension (B) onto Wall Plate (A). Secure using M6x25mm Screw (S-E) and Cap (I) with a Phillips screwdriver. STEP 3 Attach Mount Fitting (E) to Arm (C) using M6x16mm Screws (S-C) and M6.5 Washer (S-F). Use M6.5 Washer (S-F) with top screw inserted through slot. Tighten the M6x16mm Screws (S-C) using the 4mm Allen Wrench (T-B).
- Page 5 STEP 4 Assemble both halves of Keyboard Tray (F) to Keyboard Bracket (D) and Connecting Plate (K) using M5x10mm Screws (S-A) and a Phillips screwdriver. NOTE: Make sure the lip on Keyboard Tray (F) is facing up in the back, and the handle mounting holes are in the front.
- Page 6 STEP 6 Mount Keyboard Bracket (D) to Arm (C) and secure using 4mm Allen Wrench (T-B). STEP 7 Assemble Arm (C) to Arm Extension (B). Secure using M6x25mm Screw (S-E) and Cap (I) with a Phillips screwdriver. Remove adhesive backing from Pads (J) and place them on Keyboard Tray (F).
- Page 7 STEP 8 Adjust the tension in Arm (C) using 5mm Allen Wrench (T-C). Turn clockwise to reduce tension for lighter keyboards and counter-clockwise to increase tension for heavier keyboards. Lock the rotation of Arm (C) by tightening the set screw in back using 3mm Allen Wrench (T-A).
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-KB35A and is the answer not in the manual?
Questions and answers