Advertisement
Quick Links
Clamp-on Extra Long Keyboard Tray
Instruction Manual
SKU: MOUNT-KB15EB/EN/EW
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-kb15eb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo MOUNT-KB15EN
Summary of Contents for Vivo MOUNT-KB15EN
- Page 1 Clamp-on Extra Long Keyboard Tray Instruction Manual SKU: MOUNT-KB15EB/EN/EW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-kb15eb GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
- Page 2 If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts.
-
Page 3: Package Contents
PACKAGE CONTENTS D (x2) C (x2) A (x1) B (x2) Clamp Slider Bracket Tray Set Connecting Brackets F (x1) E (x2) Keyboard Stop S-A (x6) S-B (x8) S-C (x12) M4x7mm M5x12mm M5x12mm Screws Pan Head Flat Head Screws Screws TOOLS NEEDED NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED Phillips Screwdriver... -
Page 4: Assembly Steps
ASSEMBLY STEPS STEP 1 Assemble Slider Brackets (C) to Clamps (D) using M4x7mm Screws (S-A). Tighten with a Phillips screwdriver. NOTE: Clamp can be offset using the extra holes in Slider Brackets (C) to allow the tray to be pulled out an extra 1.2”... - Page 5 STEP 2 Assemble Keyboard Tray Set (A) together with Connecting Brackets (B) using M5x12mm Flathead Screws (S-C). Tighten with a Phillips screwdriver. Attach Keyboard Tray Stop (F) to the underside of assembled keyboard tray using M5x12mm Flathead Screws (S-C). Tighten with a Phillips screwdriver.
- Page 6 STEP 3 Assemble slider bracket assembly to tray assembly using M5x12mm screws (S-B), and tighten with a Phillips screwdriver. The clamps must be on the opposite end from the center cable guide. Right Side Left Side STEP 4 Place Pads (E) on the underside of each clamp. Place assembled keyboard mount on edge of desk and tighten clamps.
- Page 7 STEP 5 Slide keyboard tray forward/back to desired position.
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-KB15EN and is the answer not in the manual?
Questions and answers