Advertisement
Quick Links
Under Desk Keyboard Tray with
Swinging Height Adjustment
Instruction Manual
SKU: MOUNT-KB08S/SW
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-kb08s
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo MOUNT-KB08SW
Summary of Contents for Vivo MOUNT-KB08SW
- Page 1 Swinging Height Adjustment Instruction Manual SKU: MOUNT-KB08S/SW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-kb08s GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
-
Page 2: Package Contents
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 Assemble Keyboard Tray Set (A) by placing Connecting Plates (B) into the insets on underneathside of Tray. Secure with M5x12mm Screws (S-A) and a Phillips screwdriver. STEP 2 Install Keyboard Stop (D) onto assembled Keyboard Tray using M5x12mm Screws (S-A) and a Phillips screwdriver. - Page 4 STEP 3 Secure Height Adjustable Bracket Set (C) to the sides of Keyboard Tray (A) using M5x12mm Screws (S-A) and a Phillips screwdriver.
- Page 5 STEP 4 Unfold the Adjustable Brackets (C) by pressing down on the levers and pulling the top bracket up. Make sure the brackets are adjusted to the same level for installation.
- Page 6 STEP 5 Hold Mounting Template (T-A) to the underside of desk, 0.5” (12mm) from the edge and mark hole locations. Underside of Desk 0.5”/12mm from desk edge Drill 3/8” (10mm) deep holes using a 1/8” (3mm) drill bit. Mount keyboard tray assembly using M5x14mm Screws (S-B) and a Phillips screwdriver.
- Page 7 ASSEMBLY COMPLETE Keyboard tray is now ready for use. Desktop...
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-KB08SW and is the answer not in the manual?
Questions and answers