Table of Contents
Advertisement
M-78F0714 Micro-Board for µPD78F0714 Microcontroller
1. Introduction
The M-78F0714 micro-board is designed to demonstrate and evaluate the CPU and on-chip
peripheral functions of the NEC Electronics 8-bit µPD78F0714 microcontroller (MCU). The micro-
board can be operated in standalone mode to evaluate the main features of the MCU or it can be
connected through two 100-pin connectors to a separately sold motor control interface board (MC-
IO) to evaluate the MCU's dedicated 3-phase motor control peripherals. The micro-board also may
be used with a low-cost evaluation system called the M-Station (sold in the U.S. only), but this
manual only describes configuration and operation of the M-78F0714 when used with the MC-IO
board.
Figure 1.
Top View
M-78F0714 Micro-Board
Bottom View
1
Advertisement
Table of Contents
