Advertisement
HEIGHT CONTROL INSTRUCTIONS
Press the UP button to lift the desk.
Press the DOWN button to lower the desk.
DOWN button
UP button
TROUBLESHOOTING
Symptom
Possible Cause
Cables not connected properly.
No response from a long press of the DOWN
1
Power supply off.
button after power is connected.
Other fault.
Overloaded (maximum load 70kg
including desktop).
2
Desk does not lift when up button is pressed.
Power or connection fault.
Other fault.
Duty cycle exceeded 2 minutes on
- 18 minutes off.
3
Cuts out during use.
Other fault.
Duty cycle exceeded 2 minutes on
No response from pressing the UP or DOWN
- 18 minutes off.
4
buttons, after working for a period of time.
Other fault.
Overloaded (maximum load 70kg
including desktop).
5
During lifting the desktop automatically returns
Desk is shaking too much.
C
SAFETY
Assembly
G
• Only to be assembled by a competent person - check carefully for complete and correct assembly before use.
• Dispose of packaging in an environmentally-friendly manner. Recycle cardboard and paper.
• Keep plastic and small parts out of the reach of children. Danger of suffocation/choking.
Product care
• Unplug before servicing and cleaning.
• Wipe surfaces with a damp microfibre cloth - do not spray cleaner near electrical parts or connections.
• Do not use chemical or abrasive cleaners.
• Do not leave work surface wet.
• Use a drinks coaster to prevent marks.
• Use a mouse mat to prevent abrasion of the work surface.
End of life disposal
• This product must be recycled in accordance with WEEE directives.
Reset
When the desk is at the lowest position press the DOWN button
for 5 seconds.
Anti-collison
The control box includes a built-in sensor which detects
resistance. When encountering any object underneath the desk
the motor instantly stops and reverses. To turn off the anti-
collision function hold down the UP & DOWN buttons together
for 5 seconds.
Remedy
Check connections and retry.
Check power supply.
Contact your supplier.
Check and lighten load if necessary.
Check power supply and connections
in Symptom 1.
Contact your supplier.
Wait 30 minutes for the motor to cool
and retry.
Contact your supplier.
Wait 30 minutes for the motor to cool
and retry.
Contact your supplier.
Check and lighten load if necessary.
TECHNICAL DATA
Column Number
2
Maximum Load
70kg
Maximum Speed
25mm/second
Input Voltage
100-240v
Lowest Position
710mm
Highest Position
1210mm
Desktop Size
Width 1000-1600 mm
Depth 500-800 mm
Duty Cycle
Continuous operation for
2 minutes at most after
pause for 18 minutes
Operating Temperature Range
0-40°C
Advertisement
