Set The Harmonic Phase - Hantek HDG3000C Series User Manual

EN
7.6

Set the Harmonic Phase

Press [Wave] >
softkey to set the phase of each harmonic.
1. Index:
Press this softkey to select the index number of the harmonic to be selected.
2. Phase:
Press this softkey to set the phase of the selected subharmonic. Use the numeric
keypad to input the phase value and then select the unit "° " from the pop-up menu,
or use the direction keys and knob to modify the current value. For the input
method of phase value, refer to the introduction in "
Copyright © Qingdao Hantek Electronics Co., LTD
Harmonic softkey to enter the harmonic setting menu and press
Harmonic Output
Phase
Parameter Setting Method
HDG3000C User manual
".
35