Run The Dds-3005 Usb; Choose The Wave Forms; Waveform Parameter Setup - Hantek DDS-3005 USB User Manual

3.3 Run the DDS-3005 USB

Click Start - Program - DDS-3005 USB - DDS-3005 USB to go into the main
" " " " " " " "
window, shown as below:

3.4 Choose the Wave Forms

Press down any button of certain waveform to switch to the output of such kind
of waveform. When switch to arbitrary waveform from other kind of waveform,
the edition work can be done on the original wave form.

3.5 Waveform Parameter Setup

Select the Parameters in the Menu, there are the choices for setting of
" "
various waveform parameters.
10