Waveform Parameter - Hantek Hantek1025G User Manual

3.1 Waveform parameter

1. Choose waveform
Press down any button of certain waveform to switch to the output of such kind of waveform.
When switch to arbitrary waveform from other kind of waveform, the edition work can be
done on the original wave form.
2. Set waveform parameters
Click Menu "Wave Parameter", there are the choices for setting of various waveform
parameters.
For example: click "AM/FM" to set the AM/FM parameters in the dialog.
USER'S MANUAL
Hantek1025G
18