Initiating a Test
Initiate tests using the following procedure:
1.
Select T
EST
.
Enter
2.
Specify local or remote testing by selecting the corresponding num-
ber, followed by
3.
Use the
Up
4.
Select a test from the available options by pressing the corresponding
number, followed by
The example in Figure 4-2 shows the menu path for initiating a local DTE
and Loop test.
Once a test is initiated
screen.
TUS
61200063L1-20
from the main menu by pressing
Enter.
and
arrows to view test options.
Down
Enter
2=TEST 1=LOCAL UNIT
2=REMOTE UNIT
3=DBU CONNECTION
Please Wait
DSU III TDM User Manual
Chapter 4. Testing and Troubleshooting
.
Figure 4-2. Initiating a Test
is displayed briefly followed by the S
and then pressing
2
1=DTE & LOOP(LL)
2=LOOP ONLY (RT)
3=DTE ONLY
4=DTE WITH TP
5=TEST PATTERN
6=SELF TEST
-
TA
4-3