ADTRAN DSU III TDM Manual page 105

V.35 ADAPTER CABLE
The V.35 adapter cable allows the DSU II TDM to interface with DTE
equipment using the V.35 interface. The cable supports data rates of 2.4
kbps to 64 kbps and is powered from ±12 V supplied by the DSU III TDM.
The cable (part number 1200063L6) is a 6 foot cable.
Electrical Interface
DTE Standard V.35 signal interface
DCE Standard EIA-232 signal interface
Mechanical Interface
DTE The V.35 interface is provided on a M-34 male connector.
The pinout is shown in Table A-4 on page A-4.
DCE The EIA-232 interface is provided on a 25-pin male D
connector. The pinout is shown in Table A-5 on page A-5.
Power Requirements
Power is supplied on pins nine and ten of the DB-25 DCE connector as fol-
lows:
+ 12 V
- 12 V
61200063L1-20
Pin 9, 50 mA max
Pin 10, 50 mA max
DSU III TDM User Manual
Appendix A. Pinouts
A-3