Table of Contents
Advertisement
T-WATCH Pro Management Software Program
T-WATCH Pro is the ADTRAN management software program that
allows the user to control the TSU ACE from a PC. It provides com-
plete control over the configuration of the TSU ACE using a graphic
interface.
The T-WATCH Pro program displays the same status and perfor-
mance data as the front panel LCD. This data is displayed in the form
of tables and graphs.
The TSU ACE can be remotely configured using T-WATCH Pro. The
ESF FDL or the 8K inband channel is used to connect to the TSU ACE.
The PC with T-WATCH Pro installed on it must be connected to an
ADTRAN T1 CSU/DSU with a control/chain in port. Such products
include: TSU, TSU LT, TSU ESP and the TSU XX0 family of T1 multi-
plexers. See Figure 5-6 on page 5-9.
TSU ACE Testing
The TSU ACE offers three forms of testing:
•
Self-test
•
Loopback tests
•
Pattern generation and detection
Self-Test
The self-test checks the integrity of the internal operation of the elec-
tronic components by performing memory tests and by sending and
verifying data test patterns through all internal interfaces. Although
actual user data cannot be passed during these tests, the self-test can
run with the network and DTE interfaces in place and without dis-
turbing any external interface.
The self-test automatically executes upon power up. It can also be
commanded from a front panel menu or from the control port.
61200295L1-20
TSU ACE User Manual
Chapter 1. Introduction
1-7
Advertisement
Table of Contents
