Clear To Send (Cs) Options; Forced On; Follows Rs; Figure 7-4. Selecting Clear To Send (Cs) Options - ADTRAN DSU III TDM Manual

Clear to Send (CS) Options

The CS O
PTIONS
for the CS lead. Figure 7-4 on page 7-5 shows the menu path used to access
the CS O
PTIONS

Forced On

The CS lead remains on and request to send (RS) is ignored as long as the
unit is synchronized and able to pass data.

Follows RS

The CS state matches the RS state. No data can be received from the DTE
device until RS is activated. The CS lead only follows RS when the unit is
able to pass data, for example, when the unit it on-line and properly syn-
chronized.
3=CONFIG
61200063L1-20
menu is used to select one of two different control modes
menu. The factory default setting is F
1=NETWORK OPT.
1=LOCAL
2=DTE OPTIONS
2=REMOTE
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND

Figure 7-4. Selecting Clear to Send (CS) Options

DSU III TDM User Manual
Chapter 7. Configuring DTE Options
OLLOWS
1=DTE RATE
2=DATA FORMAT
3=TX CLOCK
4=CS OPTIONS
5=CD OPTIONS
6=SR OPTIONS
RS.
1=FORCED ON
2=FOLLOWS RS
7-5