Remote Digital Loopback (Rdl); Figure 8-2. Remote Digital Loopback - ADTRAN DSU III TDM Manual

Chapter 8. Configuring Test Options

Remote Digital Loopback (RDL)

The RDL EN/DIS option determines whether the DSU III TDM accepts a
remote digital loopback (RDL) request from the far end of the circuit. The
factory default setting is RDL
used to access the RDL EN/DIS option.
3=CONFIG
8-2
ACCEPTED
1=NETWORK OPT.
2=DTE OPTIONS
1=LOCAL
3=TEST OPTIONS
2=REMOTE
4=DIAL OPTIONS
5=MANUAL

Figure 8-2. Remote Digital Loopback

DSU III TDM User Manual
. Figure 8-2 shows the menu path
1=TEST TIMEOUT
2=RDL EN/DIS
3=DBU ANS. TEST
1=RDL IGNORED
2=RDL ACCEPTED
61200063L1-20