Chapter 8. Configuring Test Options; Test Options; Test Timeout; Figure 8-1. Setting Test Timeout - ADTRAN DSU III TDM Manual

Chapter 8

TEST OPTIONS

The T O
EST PTIONS
ifies the maximum test time allowed.

Test Timeout

The T
T
EST IMEOUT
a test mode before automatically returning to the data mode. Enter the
time out in two-digit decimal value. The range is 0 to 99 seconds. The fac-
tory default setting is 0, which disables the timer so tests can run indefi-
nitely. Figure 8-1 shows the menu path used to access T
3=CONFIG
61200063L1-20
Configuring Test Options
menu enables or disables different test modes and spec-
option sets the length of time a DSU III TDM remains in
1=NETWORK OPT.
2=DTE OPTIONS
1=LOCAL
3=TEST OPTIONS
2=REMOTE 4=DIAL OPTIONS
5=MANUAL
DSU III TDM User Manual
1=TEST TIMEOUT
2=RDL EN/DIS
3=DBU ANS. TEST

Figure 8-1. Setting Test Timeout

.
T
EST IMEOUT
ENTER TIMEOUT
(0=OFF) : 00 SEC
8-1