Table of Contents
Advertisement
Troubleshooting
5
Troubleshooting
Case 1: Device function(s) are "banged out" in Device Manager.
•
Make sure that the latest updates are installed for the operating system.
•
Make sure that the latest drivers are installed for the host controller.
Case 2: The EVM does not work at all.
•
Verify that all switches are in their default state and the EVM is powered on with a 5-V source with
adequate current.
•
If installed, remove the serial EEPROM from the EEPROM socket. The EVM does not require an
EEPROM to operate.
•
In the case where a 12-V power supply has been attached to the EVM, the fault is non-recoverable.
10
Hardware Set Up
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
SLLU163 – May 2012
Submit Documentation Feedback
Advertisement
Table of Contents
Need help?
Do you have a question about the TUSB8040AEVM and is the answer not in the manual?