Table of Contents
Advertisement
Quick Links
This is the user guide for the evaluation module (EVM) of the TUSB213. The purpose of this user guide is
to facilitate an easy evaluation process of our TUSB213 USB High-Speed signal conditioner.
The contents of this user's guide are meant to provide an overview of the TUSB213, which includes
highlighting its key features, operating conditions, and how to setup this EVM for use in a system level
evaluation.
The construction of the TUSB213 EVM also serves as a reference design that can be easily modified for
any intended application. Target applications include cell phones, desktop or notebook computers, docking
stations, TVs, and active cables. Schematic and layout information is included at the end of this manual.
...................................................................................................................
1
2
2.1
2.2
2.3
2.4
3
4
4.1
5
5.1
5.2
TUSB213 EVM Material Listing
1
Functional System Level Block Diagram
2
3
TUSB213 EVM Schematic
1
TUSB213 EVM Jumper Descriptions
2
EQ and Boost Setting Based on Cable Length
3
TUSB213 EVM Bill of Materials
Trademarks
All trademarks are the property of their respective owners.
SLLU264 - August 2017
Submit Documentation Feedback
..............................................................................................
......................................................................................
.........................................................................................
.............................................................................................
...............................................................................................................
..............................................................................
..................................................................................
............................................................................................................
...............................................................................
...................................................................................
.................................................................................
..............................................................................................................
..................................................................................................
.....................................................................................
............................................................................................
Copyright © 2017, Texas Instruments Incorporated
TUSB213 Evaluation Module
Contents
.........................................................
List of Figures
List of Tables
..........................................................................
User's Guide
SLLU264 - August 2017
TUSB213 Evaluation Module
2
3
3
3
3
4
5
5
5
6
6
7
2
3
6
4
4
7
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments TUSB213
Summary of Contents for Texas Instruments TUSB213
-
Page 1: Table Of Contents
SLLU264 – August 2017 TUSB213 Evaluation Module This is the user guide for the evaluation module (EVM) of the TUSB213. The purpose of this user guide is to facilitate an easy evaluation process of our TUSB213 USB High-Speed signal conditioner. -
Page 2: Introduction
Introduction www.ti.com Introduction The TUSB213 is a USB high-speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel. The TUSB213 design is agnostic to USB low and full-speed signals and does not affect full-speed (FS) and low-speed (LS) signaling. -
Page 3: Tusb213 Evm Configuration
Description of EVM Board The TUSB213 EVM is designed to provide easy evaluation of the device. It is also meant to serve as a reference design to show a practical example of how to use the device in a mass-production system. -
Page 4: Selecting Equalization And Boost Level For Tusb213
TUSB213 in the best location. A typical use case is to place the TUSB213 close to the USB connector on a host platform in order to pass Near-End Eye Mask testing. This includes systems where the USB connector may be placed at the far-end of a cable. -
Page 5: Evm Operation
Section 4.1 for details): 1. Connect the USB test fixture to the host, downstream HUB (+ TUSB213) port or device under test. 2. Configure the host, or HUB, or device using xHSETT or HSETT to send test packets using the procedure detailed in the HSETT documentation. -
Page 6: Pcb Construction
This section discusses the construction of the EVM boards. It includes the board schematics and layout files to show how the board was built. TUSB213 EVM Board Schematics Figure 3 illustrates the TUSB213 EVM schematics. TUSB213EVM - INT064A-001 213_VCC VBUS VBUS HDR2X1 M .1... - Page 7 PCB Construction www.ti.com TUSB213 EVM Material Listing lists the complete BOM for the TUSB213 EVM. Table 3. TUSB213 EVM Bill of Materials Item Quantity Reference Part C1,C2,C6 0.1uF 10uF D1,D2 J1,J2,J3,J4,J5 HDR2X1 M .1 USB3.0 Type B Receptacle USB3 Type A Receptacle R1,R2,R3,R4 1.7K...
- Page 8 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 9 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 10 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 11 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
- Page 12 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
- Page 13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TUSB213EVM...
Need help?
Do you have a question about the TUSB213 and is the answer not in the manual?
Questions and answers