Viessmann Vitoconnect OPTO2 Operating Instructions Manual page 12

Preparing for installation
Installation site
(cont.)
Vitotrol 100, type OT1
Type of installation: Wall mounting
On an inner wall in the main living room, approx.
■
1.5 m from the floor
■ The installation location must be dry and frost-free.
■ Ensure ambient temperatures between 0 and
+40 °C.
Ranges
The range of Wi-Fi connections can be reduced by
walls, ceilings and furniture. The strength of the Wi-Fi
signal gets reduced and reception can be disturbed.
Reduction of the range:
■ Wi-Fi signals get attenuated on the way from the
transmitter to the receiver, for example, through the
air and when penetrating walls.
■ Wi-Fi signals are reflected by metallic parts,
for example, reinforcement in walls, metal foils of
heat insulation and metallised thermo-glass for heat
insulation.
Wi-Fi signals are cut off by supply blocks and lift
■
shafts.
Wi-Fi signals are disturbed by devices that also
■
work with high-frequency signals. Keep a distance of
at least 2 m to the following devices:
– Computers
– Audio and video systems
Radio signals
–
Electronic transformers
–
Ballasts
–
12
Not in the immediate vicinity of doors and windows
■
Not above radiators
■
■ Not in shelving, niches etc.
■ Not close to sources of heat (direct sunlight, fire-
place, television etc.)
Note
We recommend keeping the distance between the
Vitoconnect and the Wi-Fi router as small as possible
to ensure a good Wi-Fi connection.