Product Information - Viessmann Vitoconnect OPTO2 Operating Instructions Manual

Information before starting
Intended use
(cont.)
Vitoconnect products are designed for operation in
buildings used for residential and business purposes
only. Misuse of the appliances is prohibited and will
result in exclusion of liability (e.g. commercial or indus-
trial use for a purpose other than for control and regu-
lation).
Compliance is required with the installation, service
and operating instructions supplied with the product
and provided online.
Vitoconnect products are to be used exclusively for
monitoring, operation and optimisation of the systems,
using the user and communications interfaces defined
in the printed material of the product. For the commu-
nications interfaces, it must be ensured on-site that for
all the transmission media used, the system require-
ments defined in the product documents are met at all
times (e.g. the required Wi-Fi connection to a Wi-Fi
router).

Product information

Vitoconnect is a wall-mounted Internet interface that
communicates with the boiler control unit of the heat
generators.
The Vitoconnect enables remote control of heating
systems via the internet. Settings and checks are
made via the ViCare app.
Alternatively, the heating system can be controlled
remotely by the contractor using ViGuide.
Vitoconnect, type OPTO2
The Vitoconnect, type OPTO2, can be used for single
boiler systems with an Optolink interface.
Maintenance parts and spare parts
You can identify and order maintenance parts and spare parts directly online.
Viessmann Partnershop
Login:
https://shop.viessmann.com/
Data connections with Vitoconnect, type OPTO2
In conjunction with heat generators with Optolink inter-
face only
8
For voltage supply, only the components specified for
this purpose may be used (e.g. wall power supplies).
Note
The appliances are designed exclusively for domestic
or domestic-like use, i.e. even uninstructed persons
can safely operate them.
Vitoconnect, type OT2
The Vitoconnect, type OT2, can be used for single
boiler systems with an OpenTherm interface.
After commissioning Vitoconnect, type OT2, the heat
generator is operated exclusively via the ViCare app.
Room temperature settings can also be made via the
Vitotrol 100, type OT1.
Viessmann spare part app
www.viessmann.com/etapp