Bacnet Client Configuration - Johnson Controls EasyIO FS Series User Manual

Binary Input, BI
Binary Output, BO
Binary Value, BV
Multi State Input, MSI
Multi State Output, MS0
Multi State Value, MSV
Loop

BACnet client configuration

You can drop the network object anywhere in the Sedona app tree. For example, you can create a separate folder
for each network.
Service
BACnet client Network (Both IP and MSTP)
Device
The BACnet driver, easyioFGBACnet, is dependent on the installation of the easyioFGDriver. To enable the
configuration of the BACnet client network in a FS series device, you must install these kits. To install the kits,
complete the following steps:
1. Connect to the controller with Sedona Workbench or CPT Tools with the following default logon
credentials:
Priority Array
Relinquish Default
Object Identifier
Object Name
Present Value
Object Identifier
Object Name
Present Value
Priority Array
Relinquish Default
Object Identifier
Object Name
Present Value
Priority Array
Relinquish Default
Object Identifier
Object Name
Present Value
Object Identifier
Object Name
Present Value
Priority Array
Relinquish Default
Object Identifier
Object Name
Present Value
Priority Array
Relinquish Default
Object Identifier
Object Name
Present Value
Points