Sw-1693 Board - Sony HXC-FB75H Service Manual

4-13.

SW-1693 board

Preparation
1. Remove the inside panel assembly. (Refer to
2. Remove the front panel assembly. (Refer to
3. Remove the CN-3853 board. (Refer to
Procedure
1. Remove the SW-1693 board.
(1) Disconnect the harness from the connector (CN001) on the SW-1693 board.
(2) Remove the screw, and remove the SW-1693 board.
Harness
CN001
PSW2 x 5
Note
When installing the SW-1693 board, align the boss with the hole of the SW-1693 board.
2. Remove the parts from the SW-1693 board.
(1) Remove the RE knob, VR (AUDIO) knob and front SW cushion from the SW-1693 board.
(2) Remove the Toggle switch cushion (C) and SW cap from the SW-1693 board.
Front SW cushion
VR (AUDIO) knob
3. Install the removed parts by reversing the steps of removal.
HXC-FB75H/HXC-FB75KC
"4-4-1. Inside Panel
"4-5-1. Front Panel
"4-12. CN-3853 Board")
Hole
SW-1693 board
SW cap
Toggle switch cushion (C)
SW-1693 board
RE knob
Assembly")
Assembly")
Boss
4-32