Table of Contents
Advertisement
Purpose of this manual
This manual is intended for the use of the system engineers and the service engineers, and provides the limited
information for block service and the information related to maintenance of the unit, service overview, periodic
maintenance and inspection, diagnosis, replacement of main parts, electrical alignment, software upgrade, file system,
setup menu, circuit description, etc.
Related manuals
The following manuals are available for this model.
If any of these manuals is required, please contact your local Sony Sales Office/Service Center.
• Operating Instructions CD-ROM (supplied with the unit)
This manual contains information required to operate and use the unit.
• Factory Service Manual (available on request)
This manual provides the limited information for component service and the information related to maintenance
of the unit.
Trademarks
Trademarks and registered trademarks described in this manual are as follows.
• FRAM is a registered trademark of Ramtron International Corporation.
• eMMC is a registered trademark of JEDEC Solid State Technology Association.
Other system names and product names written in this manual are usually registered trademarks or trademarks of
respective development manufacturers.
Non-disclosed boards
Following boards cannot be replaced on the board-level service or part-level service.
If parts become defective, replace the entire prism block assembly.
• BI-254 board
• BI-256 board
HXC-FB75H/HXC-FB75KC
Manual Structure
7
Advertisement
Table of Contents
